HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 69
Removing the Memory Cartridge, Removing the memory cartridge
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Processor and Memory Module Removal and Replacement Procedures Removing the Memory Cartridge To remove a memory cartridge from the ProLiant DL760 G2 server, complete the following steps: 1. Unlock the memory cartridge by rotating the cartridge lock counterclockwise (1). IMPORTANT: If the memory cartridge is not required for continued operation (with at least four other memory cartridges installed, online, and error free), the memory cartridge power LED will turn off. IMPORTANT: If the cartridge is required for continued operation, an audible caution alarm will sound and the memory cartridge attention LED indicator will blink until the cartridge is locked again. 2. Verify that the cartridge power LED is off. CAUTION: Do not remove a memory cartridge if the cartridge power LED indicator is blinking or is solid green. The system will halt. 3. Push the lever latch upward to release the memory cartridge lever (2). 4. Pull the memory cartridge lever down (3). 5. Slide the cartridge out of the processor and memory module (4). CAUTION: Do not leave a memory cartridge out of its slot for more than two minutes to ensure proper airflow and cooling. Figure 5-12: Removing the memory cartridge CAUTION: Inspect the memory cartridge for bent pins before reinstalling it. Do not "drop" t he cartridge into the cage. HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM 5-11