HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 63
Processor Boards and Processors, Identifying
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Processor and Memory Module Removal and Replacement Procedures Processor Boards and Processors Identifying The ProLiant DL760 G2 server is capable of supporting up to eight Intel® Xeon processors MP and is shipped with four or eight processors already installed. The ProLiant DL760 G2 server supports two processor boards located in the left side of the processor and memory module. Figure 5-5: Processor boards Table 5-1: Processor Boards Item 1 2 Description Processor board in processor board slot 1 Processor board in processor board slot 2 The ProLiant DL760 G2 server supports four or eight Intel Xeon processors MP. • All processors must be the same speed, cache size, and stepping. • Processor 1 must always be installed to properly terminate the processor bus. NOTE: Stepping refers to the processor revision. NOTE: If the server has one processor board (four processors), processor board slot 2 is populated with a processor board air baffle. This baffle must be removed if you are upgrading to eight processors. Refer to the HP ProLiant DL760 Generation 2 Server User Guide for upgrade instructions. HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 5-5 HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM