HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 62
Removing the processor and memory module, To reassemble the server
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Processor and Memory Module Removal and Replacement Procedures 4. Press the module stop latches in (4) and pull the module out of the chassis (5), as shown in Figure 5-4. Figure 5-4: Removing the processor and memory module WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. NOTE: The I/O lid labels, processor board cover, and memory cartridge covers also provide instructions about installing processors and DIMMs. To reassemble the server, slide the module in until the cam levers begin to rotate. Then push the cam levers shut until they snap into place. 5-4 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM