HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 59

Processor and Memory Module Removal and Replacement Procedures, Shipping Screws

Get HP DL760 - ProLiant - G2 PDF manuals and user guides
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

5 Processor and Memory Module Removal and Replacement Procedures Shipping Screws To prevent damage to the processor and memory module during shipping, the server ships with a shipping screw installed on each side of the chassis. These screws must be removed and the processor and memory module properly seated and secured in the chassis before powering up the server. CAUTION: To prevent damage to the processor and memory module during shipping, both shipping screws must be installed. 1. Remove the left and right shipping screws. The shipping screws may look like (1) or (2) in the following figure. Figure 5-1: Shipping screws 2. Rotate the module release levers downward. 3. Slide the module into the chassis until the levers begin to rotate. 4. Then push the levers upward until they snap into place. HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 5-1 HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
5
Processor and Memory Module Removal and
Replacement Procedures
Shipping Screws
To prevent damage to the processor and memory module during shipping, the server ships
with a shipping screw installed on each side of the chassis. These screws must be removed
and the processor and memory module properly seated and secured in the chassis before
powering up the server.
CAUTION:
To prevent damage to the processor and memory module during shipping, both
shipping screws must be installed.
1.
Remove the left and right shipping screws. The shipping screws may look like (1) or (2)
in the following figure.
Figure 5-1:
Shipping screws
2.
Rotate the module release levers downward.
3.
Slide the module into the chassis until the levers begin to rotate.
4.
Then push the levers upward until they snap into place.
HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide
5-1
HP CONFIDENTIAL
Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM