HP Designjet 2000/3000cp HP DesignJet ColorPro - User's Guide - Page 13
Control Panel Keys
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Control Panel Keys Printer Basics [Menu] Cycles through the control panel menus. To print a menu map from the control panel: 1. Press [Menu] until SELF TEST MENU appears. 2. Press [Item] until PRINT MENU MAP appears. 3. Press [Select] to print the menu map. Menu [Item] [Value] [Select] [Cancel Job] (Go) For information on each menu item, see "Control Panel Menus" on page 50. Cycles through the items of the selected menu. • Cycles through the values of the selected menu item. • Allows you to navigate between the different trays. • Saves the selected value for that item. An asterisk (*) appears next to the selection, indicating that it is the new default. Default settings remain when the printer is switched off or reset unless you reset all factory defaults from the [RESETS] menu. • Prints the selected printer information page from the control panel. Cancels the print job that the printer is processing. The time it takes to cancel depends on the size of the print job. (Press it only once.) • Places the printer either on-line or off-line. • Allows the printer to resume printing after being off-line. Clears most printer messages and places the printer on-line. • Allows the printer to continue printing with a warning message such as TRAY x LOAD [TYPE] [SIZE] or UNEXPECTED PAPER SIZE. • Exits the control panel menus. (To save a selected control panel setting, first press the [Select] button.) • Displays unrecoverable error codes. HP DesignJet ColorPro Series: User's Guide (version 1) page 13 of 64