HP Designjet T790 HP Designjet T790 and T1300 ePrinter: User's Guide - English - Page 49

Front panel procedure with paper on the roll If there is paper on the roll, you can unload it from the front panel. 1. Press , then the roll icon, then Unload. Alternatively, press Unload roll 2. , then , then Paper > Paper unload > Unload roll 1 or 2. You may need to open the roll cover. Roll out of paper procedure If the end of the paper is no longer attached to the core, use the following procedure. 1. If you have already started the unload process, press on the front panel to cancel that procedure. 2. Lift the blue lever on the left. If the front panel displays a warning about the lever, ignore it. 3. Pull out the paper from the printer. Pull from wherever the paper is accessible; the back of the printer is recommended. You may need to open the roll cover. 4. Lower the blue lever. Load a single sheet 1. When using a T1300 series printer, ensure that the cover of roll 1 is closed. If it is opened while a sheet is loaded, the sheet will be immediately unloaded. 2. At the front panel, press then the roll 1 icon, then Load > Load sheet. Alternatively, press , then , then Paper > Paper load > Load sheet. 3. If a roll is already loaded, you have to wait while it is automatically unloaded. In the T1300 series only, the roll is not unloaded, but withdrawn to the standby position, so that it can be printed on again without reloading as soon as the sheet paper has been unloaded. NOTE: If at any time you open a roll cover while that roll is in the standby position, the roll will be automatically unloaded, and you will have to reload it the next time you want to print on it (T1300 series only). 4. Select your paper category and type. TIP: If you have loaded a paper type whose name does not appear in the paper list, see The paper type is not in the driver on page 143. Paper handling ENWW Load a single sheet 41