HP LaserJet 5p/mp Service Manual - Page 46
Removing the Power Door, Removing the I/O Cover
View all HP LaserJet 5p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
HP LaserJet 5P Printer Service Supplement Removal and Replacement Removing the Power Door The Power Door is located on the right rear of the printer. 1. Ensure the power to the printer is turned OFF. 2. Grasp the power door by the finger slot directly above the power cord, and swing the rear of the door out and forward. The door easily tilts and lifts out. 3. Unplug the power cord from the printer power socket. Removing the I/O Cover The I/O Cover is located to the left rear of the printer. 1. Locate the two release tabs shown in Figure 13. Press the tabs in, and swing the rear of the door out and forward. The door easily lifts away from the printer. Figure 13 I/O Cover Release Tabs 39
Removing the Power Door
The Power Door is located on the right rear of the printer.
1.
Ensure the power to the printer is turned OFF.
2.
Grasp the power door by the finger slot directly above the
power cord, and swing the rear of the door out and forward.
The door easily tilts and lifts out.
3.
Unplug the power cord from the printer power socket.
Removing the I/O Cover
The I/O Cover is located to the left rear of the printer.
1.
Locate the two release tabs shown in Figure 13.
Press the tabs
in, and swing the rear of the door out and forward.
The door
easily lifts away from the printer.
Figure 13
I/O Cover Release Tabs
HP LaserJet 5P Printer Service Supplement
Removal and Replacement
39