HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 10

1 Introduction This document contains setup and quick testing information for HP Point of Sale (POS) peripherals and systems. Note: All HP Point of Sale (POS) peripherals are not available worldwide; please check with the HP reseller in your area for the available HP peripherals. 2 General Information 2.1.1 Where to obtain the latest software for the HP POS Peripherals The latest released versions of software for the HP peripherals are available on the HP.COM web site. Once you have navigated to your HP Point of Sale platform on the HP.COM web site and have selected the operating system you will see the "download by category" section (as shown below). Please go to the appropriate category to obtain the software package. The "Software - POS" section is a generic section that is used for HP POS drivers that do not have their own category section on the web site. For example, the "OPOS Common Control Objects" Softpaq would be found there. 2.1.2 OPOS and CCO Drivers/Application On the HP Point of Sale System that have HP's Microsoft Windows operating image, the OPOS drivers for the HP branded peripherals have been installed in the image (thermal receipt printers / stand-alone MSR / hand scanner / POS keyboard with integrated MSR / pole display). The Common Control Object (CCO) version 1.9.000 (or later) have also been installed/registered in the HP Windows operating system image. 3 Port Information To identify the type and number of ports available on the system, refer to the Hardware Reference Guide included in the HP factory image and available from the Product Information support section of HP.COM. Page 10 of 545