HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 209
JPOS Drivers for the Receipt Printer Drivers, Ethernet
View all HP Retail Integrated 2x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
6.4.15 JPOS Drivers for the Receipt Printer Drivers - Ethernet If you are using the Ethernet version of the receipt printer, the entry in the CONFIG.XML must be edited to reflect the Ethernet port and IP Address to which the printer is attached. The CONFIG.XML from HP is located in the "..\Receipt Printer JPOS\JPOS\jpos\res" folder; the location will most likely be different location for you point of sale application. Please contact your administrator or POS application provider to assist on making changes to the configuration setting. 1. Plug the printer into the network and have power to the printer. 2. Run a diagnostic printout and obtain the printer IP address from the printout. Steps to obtain a diagnostics printout. a) Be sure paper is in the printer (1). b) Open the receipt cover (2). c) Press and hold the paper feed button (3). d) Close the receipt cover (2). Note: The default IP address is 192.0.0.192. If this address appears on the printout, the printer has not obtained an IP address. Page 209 of 545