HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 194

6.4.12 OPOS Test Applet for the CheckScan Note: The check scanner feature is only available on the HP Hybrid printer that has imaging capabilities. The following is an image of the the HP Hybrid printer model with imaging capabilities: The following is overview of the steps to test the receipt printer followed by detailed steps: 1. Open OPOS Test Application. • C:\xxxxx\Point of Sale\Receipt Printer\OPOS Test Utility\OPOS_Test_Application.exe. 2. Click the CheckScan button. 3. Click the Open button. 4. Click the Claim button. 5. Click the Enable button. 6. Click the BeginInsertion button. You should hear a click noise from the printer. 7. Insert the check face up in the front of the printer until the front LED comes on. 8. Click the EndInsertion button. The printer will perform the "CheckScan" operation; the document should come out the front and then will be returned back to the bottom portion of the printer. 9. Click the Enable Data Event button. 10. Click the RetrieveImage button. 11. Click on "SAVE AS" under "FILE" to save the image that was captured. Save the file with "TIF" extension. 12. Click the BeginRemoval button. 13. Click the EndRemoval button. 14. Close the "CheckScan". 15. Close the form. Detailed Steps 1. Open OPOS Test Application. • C:\xxxxx\Point of Sale\Receipt Printer\OPOS Test Utility\OPOS_Test_Application.exe. 2. Click the CheckScan button. Page 194 of 545