HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 486

7.4 HP RP7 15inch Resistive (AFD) Unit is shown down position with MSR / Biometric option. 7.4.1 Connection The 15inch resistive AFD (Associate Facing Display) is part of the base unit thus require no external cables to be connected by the user. 7.4.2 Windows Drivers for the Touch Screen For Windows 7 (32 and 64 bit) and POSReady 7 (32 and 64 bit) operating system, the touch is recognized by the operating system automatically. For Microsoft POSReady 2009 operating system, the drivers for HP touch screen are already installed in the HP factory image and are also available from HP.COM. After obtaining drivers, the following is overview of the steps to install the touch screen drivers and applets: 1. Start the touch screen installer by clicking on the SETUP.EXE file. Note: The touch driver is installed in the HP factory for HP RP7 15inch resistive model. 2. Accept the default prompt prompts until the installation process is complete to install the drivers. 3. Once the installation is complete restart the operating system by selecting YES to the restart question or manually restart after other items installation are complete. 4. Run the calibration utility. Detailed Steps 1. Start the touch screen installer by clicking on the "HP Resistive TouchScreen Driver.exe" file. Note: The touch driver is installed in the HP factory for HP RP7 15inch resistive model. Page 486 of 545