HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 223
JPOS Drivers for the Receipt Printer Drivers - MICR
View all HP Retail Integrated 2x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
6.4.18 JPOS Drivers for the Receipt Printer Drivers - MICR The JPOS drivers are included in the HP factory image (C:\xxxxx\Point of Sale\Receipt Printer\JPOS POS Printer) and are also available from HP.COM. The following is an overview of the steps to test the receipt printer followed by detailed steps: 1. Open Printer/Cash Drawer/MICR Unit Test Application. • C:\xxxxx\Point of Sale\Receipt Printer\JPOS POS Printer\HPJPOSPrinter.bat. 2. Click on the MICR tab. 3. Click the Open button. 4. Click the Claim button. 5. Click the Enable button. 6. Click on the MICR Read tab. 7. Slide the check facing down into the MICR until the LED comes on. 8. Click the Enable Data Events button. 9. Click the Begin button in the Insertion box. 10. Click the End button in the Insertion box. 11. Exit the application (ensure the device is closed and released). 12. The piece of paper that was inserted in step 7 can be removed from the imager portion of the printer by pulling on the paper; there will be slight force needed when the paper is pulled. Detailed Steps 1. Open Printer/Cash Drawer/MICR Unit Test Application. • C:\xxxxx\Point of Sale\Receipt Printer\JPOS POS Printer\HPJPOSPrinter.bat. 2. After a few seconds the JPOS test utility GUI will appear as shown below. Page 223 of 545