HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 446
JPOS Drivers for the pole display
View all HP Retail Integrated 2x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
6.14.6 JPOS Drivers for the pole display The HP Pole Display JPOS drivers are included in the HP factory image (C:\xxxxx\Point of Sale\Pole Display\Pole Display JPOS) and are also available from HP.COM. The following is an overview of the steps to test the pole display followed by detailed steps: 1. Confirm/edit the JPOS.XML file that it has the correct COM port information for the pole that you are testing. 2. Open JavaPOStester. • C:\xxxxx\Point of Sale\Pole Display\Pole Display JPOS\postest.bat. 3. Click on the "LineDisplay" tab. 4. Click on the "OPEN" button. 5. Click on the "CLAIM" button. 6. Check the "DEVICE ENABLED" so there is a check box. 7. Press the "CLEAR TEXT" button. 8. Type in the test message in the "Send to line display" box and click on "Display Text" 9. Click on "RELEASE" / "CLOSE" / "EXIT" to exit the JPOS test utility. Detailed Steps 1. Confirm/edit the JPOS.XML file that it has the correct COM port information for the pole that you are testing. Page 446 of 545