HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 149

6.4.10.2 OPOS Installation - Serial Port The following is an overview of the steps to install the receipt printer followed by detailed steps: 1. Print out the diagnostic form on the printer in order to obtain the baud rate the printer is set to. 2. Open OPOS Support For HP Printers. • C:\xxxxx\Point of Sale\Receipt Printer\POS Printer OPOS\setup.exe. 3. Select only the printer(s) that need to be installed. 4. Select the Emulation Mode of the printer being installed (HP H300 Printer is Generation II). 5. Select YES or NO to install OPOS Control Objects. 6. Select Serial Communications as the Connection Method. 7. Select the COM (serial) port that the printer is attached. 8. Refer to the diagnostics form that was printed in step 1 for the baud rate of the printer and select the Baudrate for Serial Communications. 9. Select the Parity for Serial Communications. 10. Select the Flow Control for Serial Communications. 11. For the remaining options, defaults can be selected until the installation is complete. Detailed Steps 1. Print out the diagnostic form on the printer in order to obtain the baud rate the printer is set to. 2. Open OPOS Support For HP Printers. • C:\xxxxx\Point of Sale\Receipt Printer\POS Printer OPOS\setup.exe. 3. Select only the printer(s) that need to be installed. Page 149 of 545