HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 479

7.3 HP ap5000 Touch Screen 7.3.1 Connection The touch screen on the HP ap5000 system is integrated into the system which is connected internally via PS/2 interface. There is no user connection required for this device. 7.3.2 Windows Drivers for the Touch Screen The HP ap5000 touch screen drivers are already installed in the HP factory image (C:\xxxxx\ap5000 Touch Drivers) and are also available from HP.COM. Note: Under Microsoft Vista, the touch screen install process must be run with ADMINISTRATOR privileges. The following is an overview of the steps to install the touch screen drivers and applets: 1. Start the touch screen installer from the location that was mentioned in the beginning of this section. Note: On the ap5000 unit with a Microsoft Windows image, the drivers for the ap5000 touch screen are pre-installed in the image. 2. Follow the prompts that appear on the screen. 3. After the drivers are installed, please select the option to calibrate the touch screen monitor and follow the instructions on the screen. Detailed installation instructions 1. Start the touch screen installer from the location that was mentioned in the beginning of this section. Note: On the ap5000 unit with a Microsoft Windows image, the drivers for the ap5000 touch screen are pre-installed in the image. One must have ADMINISTRATOR privileges in order to install the drivers. 2. Follow the prompts that appear on the screen. Page 479 of 545