HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 389
JPOS Drivers for the HP ap5000 VFD
View all HP Retail Integrated 2x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
6.13.5 JPOS Drivers for the HP ap5000 VFD The JPOS drivers are already installed in the HP factory image (C:\xxxxx\Point of Sale\VFD HP ap5000\ap5000 VFD JPOS) and are also available from HP.COM. The following is an overview of the steps to test the ap5000 VFD followed by detailed steps: 1. Start the JPOS test utility either using the link in the START MENU. 2. Click on the "LineDisplay" tab. 3. Replace the "defaultLineDisplay" that appears in the logical name box with "HPap5000LineDisplay". 4. Click on the "OPEN" button. 5. Click on the "CLAIM" button. 6. Check the "DEVICE ENABLED" so there is a check box. 7. Press the "CLEAR TEXT" button. 8. Type in the test message in the "Send to line display" box and click on "Display Text" 9. Click on "RELEASE" / "CLOSE" / "EXIT" to exit the JPOS test utility. Detailed Steps 1. Start the JPOS test utility either using the link in the START MENU or by opening the POSTEST.BAT file that is located in the JPOS folder within the ap5000 VFD JPOS folder. After a few seconds the JPOS test utility GUI will appear as shown below: Page 389 of 545