HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 329
JPOS Drivers for the Scanners
View all HP Retail Integrated 2x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
6.9.5 JPOS Drivers for the Scanners The JPOS drivers are included in the HP factory image and are also available from HP.COM. In order for the scanner to work with JPOS driver, the scanner must be programmed into the USB-COM mode. The following is overview of the steps to test the imaging barcode scanner followed by detailed steps: 1. Open JavaPOStester. • C:\xxxxx\Point of Sale\Scanner (LED_Imager)\Img_LED JPOS\HPJPOSImagingScanner.bat. 2. Click on the Scanner tab. 3. Select the proper device from the dropdown menu. 4. Click the Open button. After the imaging scanner is opened a check will appear in the "Data event enabled" box. 5. Click the Claim button. 6. Check the "Device enabled" checkbox. 7. Check the "Decode Data" checkbox. 8. Scan a barcode and the data will appear in the "Scan Data" and "Scan Data Label" boxes. 9. After scan is complete click the Release button. 10. Click the Close button. 11. Click on "Exit" to close the test application. Detailed Steps 1. Open JavaPOStester. • C:\xxxxx\Point of Sale\Scanner (LED_Imager)\Img_LED JPOS\HPJPOSImagingScanner.bat. 2. Click on the Scanner tab: Page 329 of 545