HP Retail Integrated 2x Point of Sale POS Peripherals Configuration Guide - Page 417

6.14.4 OPOS Drivers for the Pole Display The HP Pole Display OPOS drivers are already installed in the HP factory image and are also available from HP.COM. 6.14.5 Testing Pole Display 6.14.5.1 Testing pole display in non-OPOS environment There are two utilities available to test the display in non-OPOS environment: "HP USB Pole nonOPOS Test Utility" and "HP VFD Utility" 6.14.5.1.1 HP USB Pole non-OPOS Test Utility The following is overview of the steps to test the pole display followed by detailed steps: 1. Open HP Pole Display Test. • C:\xxxxx\Point of Sale\Pole Display\Pole Test Utility (Non-OPOS)\HP Pole Test Utility\HP Pole Display Test.exe 2. After clicking on "Display Point Test" this message will appear on the pole display. 3. One can display other text for testing purpose by entering the text in the box. After entering the text in the box, click on "Display Text" and what is entered in the text box will be displayed on the pole display. 4. Click "Exit" to close the non-OPOS test applet. Detailed Steps 1. Open HP Pole Display Test. • C:\xxxxx\Point of Sale\Pole Display\Pole Test Utility (Non-OPOS)\HP Pole Test Utility\HP Pole Display Test.exe 2. Several seconds will pass before the test GUI appears on the screen. After clicking on "Display Point Test" button this message will appear on the pole display with other block characters. When the test is complete the word "Finish..." will appear on the pole display. Page 417 of 545