Invacare 3GAR Owners Manual 2 - Page 41

SECTION 4-SAFETY INSPECTION/TROUBLESHOOTING ❑ Make sure wheel locks are easy to engage. ❑ Inspect tires for flat spots and wear. ❑ Check pneumatic tires for proper inflation. ❑ Check power center mount front riggings for worn/frayed belts and/or loose fasteners. If found, replace these items. ❑ Check that all labels are present and legible. Replace if necessary. Inspect/Adjust Weekly CAUTION As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced. ❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop. ❑ Make sure all caster/wheel/fork/headtube fasteners are secure and not damaged/ missing. ❑ Inspect tires for flat spots and wear. ❑ Check pneumatic tires for proper inflation. Inspect/Adjust Monthly ❑ Make sure axle nut and wheel mounting nuts are secure on drive wheels. ❑ Ensure that casters are free of debris. ❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop. ❑ Make sure wheel locks DO NOT interfere with tires when rolling. ❑ Make sure wheel lock pivot point are free of wear and looseness. ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. Inspect/Adjust Periodically ❑ Make sure wheelchair rolls straight (no excessive drag or pull to one side). ❑ Inspect all fasteners. ❑ Make sure clothing guards are secure. ❑ Make sure arms are secure but easy to release and adjustment levers engage properly. ❑ Make sure adjustable height arms operate and lock securely. ❑ Make sure upholstery has no rips. ❑ Make sure armrest pad sits flush against arm tube. ❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop. Part No 1134791 41 3G Storm Series® Wheelchairs