Invacare 3GAR Owners Manual 2 - Page 78
Calfpad Height, Calfpad Depth, Legrest Height
View all Invacare 3GAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
SECTION 6-FRONT RIGGINGS Calfpad Height NOTE: For this procedure, refer to FIGURE 6.21. 1. Turn the calfpad towards the outside of the wheelchair. 2. Slide calfpad up or down until desired position is obtained. 3. Turn the calfpad towards the inside of the wheelchair. Calfpad Depth Locknut Adjustment Bracket Channel NOTE: For this procedure, refer to FIGURE 6.21. 1. Remove the hex bolt and locknut that secure the calfpad and spacer to the adjustment bracket. 2. Move the legrest to one of three positions. Calfpad Spacer Adjustment Bracket Hex Bolt 3. Reinstall the hex bolt through the spacer and calfpad. NOTE: Make sure hex bolt sits flush adjustment bracket channel. FIGURE 6.21 Adjusting Genius Legrests Calfpad Height/Calfpad Depth 4. Reinstall locknut onto the hex bolt and tighten securely. Legrest Height NOTE: For this procedure, refer to FIGURE 6.22. 1. Remove the button screw that secures the adjustment link and two washers to the legrest support. 2. Move adjustment link to one of three positions. 3. Line up the two washers and adjustment link with the mounting hole in the legrest support. 4. Install the button screw and tighten securely. Washer Washer Button Screw Adjustment Link Legrest Support FIGURE 6.22 Adjusting Genius Legrests - Legrest Height 3G Storm Series® Wheelchairs 78 Part No 1134791