Invacare 3GAR Owners Manual 2 - Page 82
Removing/Installing Reclining Armrests
View all Invacare 3GAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
SECTION 7-ARMS Height NOTE: For this procedure, refer to FIGURE 7.4. 1. Remove the mounting screw that secures the armrest to the van seat frame. 2. Adjust the armrest to one of four positions. 3. Reinstall the mounting screw that secures the armrest to the van seat frame and tighten securely. Height Adjustment Holes Van Seat Frame Mounting Screw FIGURE 7.4 Adjusting Captain's Van Seat Armrests - Height Removing/Installing Reclining Armrests NOTE: For this procedure, refer to FIGURE 7.5. NOTE: This procedure applies to 2G Tarsys seating systems only. Removing Armrests 1. Lift the armrest release lever at the front of the wheelchair to the unlocked (horizontal) position. 2. Lift up on the armrest and remove from the front arm socket. 3. Press the release button at the rear of the armrest in. 4. While holding the release button in, remove the armrest from the seat frame. Installing Armrests 1. Position the armrest on the seat frame as shown in FIGURE 7.5. Locked (Down Vertical) Release Button 2. Press the release button at the rear of the armrest in. 3. While holding the release button in, slide the armrest onto the seat frame. Unlocked (Up - Horizontal) Armrest Release Lever 4. Make sure the armrest release lever is in the unlocked (horizontal) position. 5. Install the armrest into the front socket. FIGURE 7.5 Removing/Installing Reclining Armrests 6. Push the armrest release lever down into the locked (vertical) position. 3G Storm Series® Wheelchairs 82 Part No 1134791