Invacare 3GAR Owners Manual 2 - Page 98

Wheelchairs Equipped with MCC-MARK IV Joystick - Attach the battery charger

Page 98 highlights

SECTION 10-BATTERIES 1. Perform one of the following: • Wheelchairs Equipped with MCC-MARK IV Joystick - Attach the battery charger connector to the charger cable/battery harness. NOTE: The battery charger connector is factory installed on the right side of the wheelchair. It can be positioned on either side of the wheelchair for user convenience. NOTE: For Recliners Only - If the wheelchair is a recliner, the battery charger connector as well as the limit switch, are factory set on the right side of the wheelchair. However, they can be positioned on either side for user convenience. The limit switch MUST be positioned on the same side as the battery charger connector. • Torque SP Equipped with MARK IV RII Joystick- Attach the battery charger connector to the charger port on the Front of the joystick. 2. Plug the charger's AC power cord, or extension, into the grounded 120 VAC wall outlet. 3. Wait until charging is complete. NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a battery's life is extended if the charge level is maintained well above a low condition. NOTE: If the batteries need to be charged more often or take longer to charge than normal, they may need to be replaced. Contact an Invacare dealer for service. 3G Storm Series® Wheelchairs 98 Part No 1134791

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

SECTION 10—BATTERIES
3G Storm Series® Wheelchairs
98
Part No 1134791
1.
Perform one of the following:
Wheelchairs Equipped with MCC-MARK IV Joystick - Attach the battery charger
connector to the charger cable/battery harness.
NOTE: The battery charger connector is factory installed on the right side of the wheelchair. It
can be positioned on either side of the wheelchair for user convenience.
NOTE: For Recliners Only - If the wheelchair is a recliner, the battery charger connector as
well as the limit switch, are factory set on the right side of the wheelchair. However, they can
be positioned on either side for user convenience. The limit switch MUST be positioned on the
same side as the battery charger connector.
Torque SP Equipped with MARK IV RII Joystick
-
Attach the battery charger
connector to the charger port on the Front of the joystick.
2.
Plug the charger’s AC power cord, or extension, into the grounded 120 VAC wall
outlet.
3.
Wait until charging is complete.
NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a
battery’s life is extended if the charge level is maintained well above a low condition.
NOTE: If the batteries need to be charged more often or take longer to charge than normal, they
may need to be replaced. Contact an Invacare dealer for service.