Invacare 3GAR Owners Manual 2 - Page 76

Footplate Height, Speed/Height

Get Invacare 3GAR PDF manuals and user guides View all Invacare 3GAR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

SECTION 6-FRONT RIGGINGS Adjust Calfpad Secure Calfpad FIGURE 6.18 Adjusting Mechanical Elevating Legrests - Calfpads Footplate Height NOTE: For this procedure, refer to FIGURE 6.19. NOTE: The following procedure should be performed with the user in the wheelchair. 1. Loosen, but DO NOT remove, the bolt and locknut that secure the lower legrest assembly to the upper legrest assembly. 2. Move the lower legrest assembly to the desired position for the user. 3. While holding the lower legrest in position, tighten the bolt and locknut securely. 4. Repeat STEPS 1-4 for opposite legrest if necessary. Upper Legrest Assembly Bolt/Nut Lower Legrest Assembly FIGURE 6.19 Adjusting Mechanical Elevating Legrests - Footplate Height Speed/Height NOTE: Mechanical Elevating Legrest speed and height cannot be adjusted independently of the recline function of the wheelchair. If the mechanical elevating legrests are not operating as desired, have the wheelchair serviced by an Invacare dealer or technician. 3G Storm Series® Wheelchairs 76 Part No 1134791

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
SECTION 6—FRONT RIGGINGS
3G Storm Series® Wheelchairs
76
Part No 1134791
FIGURE 6.18
Adjusting Mechanical Elevating Legrests - Calfpads
Footplate Height
NOTE: For this procedure, refer to FIGURE 6.19.
NOTE: The following procedure should be performed with the user in the wheelchair.
1.
Loosen, but DO NOT remove, the bolt and locknut that secure the lower legrest
assembly to the upper legrest assembly.
2.
Move the lower legrest assembly to the desired position for the user.
3.
While holding the lower legrest in position, tighten the bolt and locknut securely.
4.
Repeat STEPS 1-4 for opposite legrest if necessary.
FIGURE 6.19
Adjusting Mechanical Elevating Legrests - Footplate Height
Speed/Height
NOTE: Mechanical Elevating Legrest speed and height cannot be adjusted independently of the
recline function of the wheelchair. If the mechanical elevating legrests are not operating as desired,
have the wheelchair serviced by an Invacare dealer or technician.
Secure Calfpad
Adjust Calfpad
Adjust Calfpad
Lower Legrest
Assembly
Upper Legrest
Assembly
Bolt/Nut