Invacare 3GAR Owners Manual 2 - Page 80
Adjusting Flip Back Armrests
View all Invacare 3GAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
SECTION 7-ARMS Flip Back Armrest Locked (Vertical) Rear Arm Socket Quick Release Pin Seat Frame Unlocked (Horizontal) Flip Back Armrest Release Lever Front Arm Socket FIGURE 7.1 Installing/Removing Flip Back Armrests Adjusting Flip Back Armrests ƽ WARNING Make sure the flip back armrest release and height adjustment levers are in the locked position before using the wheelchair. NOTE: For this procedure, refer to FIGURE 7.2 on page 81. Positioning Flip Back Armrests for User Transfer 1. Unlock the flip back armrest by pulling the armrest release lever into the up (horizontal) position. 2. Pull up on the flip back armrest and remove the armrest from the front arm socket. 3. Continue to pull up on the flip back armrest until the armrest is out of the way. 4. Repeat STEPS 1-3 for opposite flip back armrest, if necessary. Positioning Flip Back Armrests for Use 1. Make sure the flip back armrest release lever is in the up (horizontal) position. 2. Install the flip back armrest into the front arm socket. 3. Lock flip back armrest by pressing flip back armrest release lever into the down (vertical) position. 4. Lift up on flip back armrest to make sure the armrest is locked in place. 5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary. 3G Storm Series® Wheelchairs 80 Part No 1134791