Invacare 3GAR Owners Manual 2 - Page 64

SECTION 6-FRONT RIGGINGS 5. To remove the footrest, push the footrest release lever inward, rotate footrest outward. 6. Adjust footrest height if desired. Refer to Footrest Height Adjustment on page 64. Footrest Mounting Pin Mounting Tube Footplate Footrest Release Lever FIGURE 6.2 60°, 70°, MFX, Taper and 90° Footrest Height Adjustment 60°, 70°, 70° MFX, 90°, PW93, PW93E, PW93ST NOTE: For this procedure, refer to FIGURE 6.3. 1. Remove any accessories from the footrest(s). 2. Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on page 63. NOTE: Lay the footrest on a flat surface to simplify this section. 3. Remove the mounting screw, washers and locknut that secure the lower footrest to the footrest support. 4. Reposition the lower footrest to the desired height. 5. Reinstall the mounting, washers and locknut that secure the lower footrest to the footrest support and tighten securely. Locknut Washer Lower Footrest Assembly Upper Footrest Support Mounting Screw Washer 90° Footrest 6. Repeat STEPS 1-5 for the opposite side of the wheelchair footrest, if necessary. 7. Reinstall the footrest(s) onto the wheelchair. Refer to Installing/ Removing Footrests on page 63. Mounting Tube Locknut Washer Mounting Screw 8. Reinstall any accessories onto the footrest(s). 3G Storm Series® Wheelchairs FIGURE 6.3 Footrest Height Adjustment 60°, 70°, 70° MFX, 90°, PW93, PW93E, PW93ST 64 Part No 1134791