Konica Minolta bizhub C650 bizhub C650 PageScope Web Connections Operations Us - Page 128
Reminder, In order to apply the changes to the settings for items which are marked with an asterisk *
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Administrator mode 3 Item TCP/IP* Network Speed IP Address Setting Method* IP Address Subnet Mask Default Gateway IPv6 RAW Port Number Dynamic DNS Setting Host Name DNS Domain Name Setting DNS Server Setting SLP Setting LPD Setting Description Select whether or not TCP/IP is used. Select the operating speed. Select whether the IP address is automatically acquired or is directly entered. If it is automatically acquired, select the check boxes to specify the acquisition conditions. Specify the IP address of the machine. (Format Range for ***: 0 to 255) Specify the subnet mask of the connected network. (Format Range for ***: 0 to 255) Specify the default gateway for the connected network. (Format Range for ***: 0 to 255) Select whether or not IPv6 is used. If "ON" is selected, specify settings for the following. • Auto IPv6 Setting* • Global Address • Prefix Length • Gateway Address Select the check box for the port to be used, and then type in the port number. (Range: 1 to 65535) Select whether or not Dynamic DNS is enabled. If Dynamic DNS is enabled, type in the host name (up to 63 characters). Select whether or not the DNS domain name is automatically acquired. If it is not automatically acquired, type in the domain name below (up to 253 characters). A maximum of three DNS server addresses can be registered. (Format Range for ***: 0 to 255) If the machine is set to use IPv6, an IPv6 address can also be specified. Select whether or not SLP is enabled. Select whether or not LPD is enabled. 2 Reminder In order to apply the changes to the settings for items which are marked with an asterisk (*), restart the machine (turn it off, then on again). When the machine is turned off, then on again, turn the machine off with the [Power] (auxiliary power) key before turning off the main power switch. In addition, wait at least 10 seconds to turn the machine on after turning it off; otherwise, the machine may not operate correctly. When using this machine under the IPv6 environment, there are the following restrictions. - Printing using SMB is not available (available for direct hosting service). - Sending scan data using SMB is not available (available for direct hosting service). - SMB browsing is not available. - PageScope NDPS Gateway cannot be used. - DHCPv6 cannot be used. - IP filtering is not available. - The printer driver installer cannot be used. - PageScope Web Connection cannot be displayed with Flash. To specify a destination computer using the computer name in the IPv6 environment, the Direct Hosting setting must be enabled. To enable the Direct Hosting setting, prepare a DNS server and be sure to specify the DNS settings of this machine correctly. For details on specifying direct hosting settings, refer to "SMB Setting - Direct Hosting Setting" on page 3-70. C650 3-54