Konica Minolta bizhub C650 bizhub C650 PageScope Web Connections Operations Us - Page 134
If virus scanning software is used on the mail server - default admin password
View all Konica Minolta bizhub C650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Administrator mode 3 Item Port No. (SSL) Connection Timeout Max Mail Size Server Capacity Admin. E-mail Address Device Mail Address POP before SMTP POP before SMTP Time SMTP Authentication User ID Password Domain Name Authentication Settings Binary Division Divided Mail Size Description Default setting: 465 If "SMTP over SSL" is selected, specify the port number to be used for SSL communication. Specify the amount of time until communication with the server times out. Select whether or not to limit the size of sent e-mail messages. Type in the capacity of the SMTP server when limiting e-mail message sizes. (Range: 1 to 100 Mbytes) Displays the administrator address. Type in the address of the device (up to 320 characters). Select whether or not POP before SMTP is used. In order to perform user authentication with POP before SMTP, some settings must be specified so that the mail server can be accessed correctly with POP. For details, refer to "E-mail Setting - Email RX (POP)" on page 3-58. Type in the POP before SMTP period. (Range: 0 to 60 seconds) To perform SMTP server authentication, select this check box. Type in the user ID for performing SMTP server authentication (up to 255 characters). Type in the password for SMTP server authentication (up to 128 characters). Type in the domain name for the SMTP server. This option appears when user authentication settings have been specified. If "SMTP Authentication" is set to "ON", select whether user authentication or a set value is used. To divide large e-mail messages and send them in small sections, select this check box. This is used to send data that has exceeded the maximum capacity when the maximum capacity is limited per e-mail message on the e-mail server. Type in the binary division size. (Range: 100 to 15000 Kbytes) For sending e-mail, administrator address must be specified. For details on the administrator address setting, refer to "Machine Setting" on page 3-7. 2 Reminder A SMTP authentication method that is supported by the SMTP server and provided with the strongest encryption strength is automatically selected from Digest-MD5, CRAM-MD5, PLAIN, and LOGIN. If there is just one domain (realm) to which the user belongs, it is notified from the SMTP server at the time of initial communication, and communication is automatically made using the domain name. Therefore, no domain name setting on this machine is not required. If there are two domains or more to which the user belongs, however, specify the domain name to which the user belongs. If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent. If virus scanning software is used on the mail server, the binary division feature may not be available. For details, contact your network administrator. To receive binary divided e-mail messages, mail client software supporting divided reception is required. Depending on the mail client software being used, it may not be possible to combine received e-mail messages that have been divided. C650 3-60