Kyocera KM-5530 Printing System Q Operation Guide (Functions) - Page 16

Selecting the serial interface settings, Selecting the network interface

Page 16 highlights

4. Selecting the Printer Settings G Selecting the serial interface settings 1 Select "Serial" and then touch the "Detail" key. The [Serial] screen will appear. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will appear. Baud rate: Sets the Baud Rate 3. Data Bits: Sets the data bit length 4. Stop Bits: Sets the stop bit length 5. Parity: Sets the parity 6. Protocol: Sets the protocol 7. Barcode: Turns the barcode mode ON/OFF 8. 3 Select the desired setting for each item and then touch the "Close" key. The display will return to the [Serial] screen. G Selecting the network interface 1 Select "Network" and then touch the "Detail" key. The [Network] screen will appear. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will appear. Netware: Turns NetWare ON/OFF 9 and selects the NetWare Frame type 0. TCP/IP: Turns TCP/IP ON/OFF !, DHCP ON/OFF @ and sets the IP address #, Subnet Mask $ and the Gateway address %. Ether talk: Selects the Ether Talk setting ^. Option Status Page: Selects the setting for the Network Card Status Page print out &. 4-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

4-4
4. Selecting the Printer Settings
Selecting the serial interface settings
Select
Serial
and then touch the
Detail
key. The [Serial] screen
will appear.
Use the
and
cursor keys to select the desired item and then
touch the
Change
key. The setting screen for the selected item will
appear.
Baud rate: Sets the Baud Rate
3
.
Data Bits:
Sets the data bit length
4
.
Stop Bits:
Sets the stop bit length
5
.
Parity:
Sets the parity
6
.
Protocol:
Sets the protocol
7
.
Barcode:
Turns the barcode mode ON/OFF
8
.
Select the desired setting for each item and then touch the
Close
key. The display will return to the [Serial] screen.
3
Selecting the network interface
Select
Network
and then touch the
Detail
key. The [Network]
screen will appear.
Use the
and
cursor keys to select the desired item and then
touch the
Change
key. The setting screen for the selected item will
appear.
Netware:
Turns NetWare ON/OFF
9
and selects the
NetWare Frame type
0
.
TCP/IP:
Turns TCP/IP ON/OFF
!
, DHCP ON/OFF
@
and sets the IP address
#
, Subnet Mask
$
and the Gateway address
%
.
Ether talk:
Selects the Ether Talk setting
^
.
Option Status Page: Selects the setting for the Network Card Status
Page print out
&
.
1
2
1
2