Linksys SPA922 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 57
Configuring a Static IP Address on the SPA400 (If Prompted), on Configuring the, SPA9000
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Connecting the Equipment Connecting and Configuring the Equipment (New Installation) 4 STEP 4 Proceed according to the prompt or menu that appears: • If a Click OK to Upgrade message appears, click OK to upgrade the firmware. • If the Device is configured to use DHCP message appears, configure a static IP address. See "Configuring a Static IP Address on the SPA400 (If Prompted)," on page 55. • If the Main Menu appears, continue with the configuration. See "Configuring the SPA9000," on page 57. Configuring a Static IP Address on the SPA400 (If Prompted) The Wizard tests each SPA400 device to verify that it is configured with a static IP address in order to ensure professional-grade uptime. The SPA400 devices would not be available for PSTN calls or voice mail services if its IP address was changed by a DHCP server. Complete this procedure if the Wizard displays the following message: Device is configured to use DHCP. STEP 1 Click OK to display the Network Settings page. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 55