Linksys SPA922 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 59

Configuring the SPA9000, On the Main Menu, select - configuration manual

Get Linksys SPA922 - IP Phone With Switch PDF manuals and user guides
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Connecting the Equipment Configuring the SPA9000 4 Configuring the SPA9000 When the Main Menu appears, you are ready to configure the SPA9000. You will set a static IP address and upgrade firmware if needed. STEP 1 On the Main Menu, select Configure SPA9000. STEP 2 Click Next to cause the Wizard to discover all connected SPA9000 devices connected to the network. NOTE Only one SPA9000 is supported. Any unused SPA9000 devices should be disconnected from the LAN. STEP 3 Wait as the Wizard displays progress messages on the PC screen. NOTE If the Wizard is unable to detect the SPA9000, either the SPA9000 INTERNET port is not connected to the LAN switch, or you have some other LAN networking problem that needs to be resolved before you can continue. See "Manually Inputting the SPA9000's IP Address (If Prompted)," on page 58. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
Connecting the Equipment
Configuring the SPA9000
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
57
4
Configuring the SPA9000
When the Main Menu appears, you are ready to configure the SPA9000. You will
set a static IP address and upgrade firmware if needed.
STEP 1
On the Main Menu, select
Configure SPA9000
.
STEP 2
Click
Next
to cause the Wizard to discover all connected SPA9000 devices
connected to the network.
NOTE
Only one SPA9000 is supported. Any unused SPA9000 devices should be
disconnected from the LAN.
STEP 3
Wait as the Wizard displays progress messages on the PC screen.
NOTE
If the Wizard is unable to detect the SPA9000, either the SPA9000 INTERNET
port is not connected to the LAN switch, or you have some other LAN
networking problem that needs to be resolved before you can continue. See
“Manually Inputting the SPA9000’s IP Address (If Prompted),” on page 58
.