Linksys SPA922 Cisco SPA9000 Voice System Using Setup Wizard Installation and - Page 64

Upgrading SPA9000 Firmware (If Prompted), Firmware upgrade is, required

Get Linksys SPA922 - IP Phone With Switch PDF manuals and user guides
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Connecting the Equipment Configuring the SPA9000 4 Upgrading SPA9000 Firmware (If Prompted) The Wizard verifies that the SPA9000 passes the minimum firmware version requirement and will notify you in the event that out of date firmware is detected. Complete this procedure if the following message appears: Firmware upgrade is required! NOTE You must upgrade the SPA9000's firmware if the above message appears. If you press cancel instead of selecting a valid version of firmware for the device, an error message appears. STEP 1 Click OK to navigate to the current version of SPA9000 firmware that you downloaded. STEP 2 On the Firmware Upgrade page, click Browse to select the spa9000-xxx.bin or spa9000t-xxx.bin firmware file and click Open. STEP 3 Click OK to begin the upgrade process. A series of messages appear as the firmware is loaded and the device is upgraded. When the process is completed, the Wizard displays the Configure SPA9000 Voice Services page. SPA9000 Voice System Installation and Configuration Guide for Setup Wizard 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
Connecting the Equipment
Configuring the SPA9000
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
62
4
Upgrading SPA9000 Firmware (If Prompted)
The Wizard verifies that the SPA9000 passes the minimum firmware version
requirement and will notify you in the event that out of date firmware is detected.
Complete this procedure if the following message appears:
Firmware upgrade is
required!
NOTE
You must upgrade the SPA9000’s firmware if the above message appears. If you
press cancel instead of selecting a valid version of firmware for the device, an error
message appears.
STEP 1
Click
OK
to navigate to the current version of SPA9000 firmware that you
downloaded.
STEP 2
On the Firmware Upgrade page, click
Browse
to select the spa9000-xxx.bin or
spa9000t-xxx.bin firmware file and click
Open
.
STEP 3
Click
OK
to begin the upgrade process. A series of messages appear as the
firmware is loaded and the device is upgraded.
When the process is completed, the Wizard displays the Configure SPA9000
Voice Services page.