Netgear GSM7248v1 GSM7224 Administration manual - Page 101
CLI Examples, Example #1: show port security, Example #2: show port security on a specific interface
View all Netgear GSM7248v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 CLI Examples The following are examples of the commands used in the Port Security feature. Example #1: show port security (Netgear Switch) #show port-security ? all dynamic static violation Press Enter to execute the command. Display port-security information for all interfaces. Enter interface in unit/slot/port format. Display dynamically locked MAC addresses. Display statically locked MAC addresses. Display the source MAC address of the last packet that was discarded on a locked port. (Netgear Switch) #show port-security Port Security Administration Mode: Enabled Example #2: show port security on a specific interface (Netgear Switch) #show port-security 1/0/10 Intf ---1/0/10 Admin Mode -------Disabled Dynamic Limit ------600 Static Limit -----20 Violation Trap Mode --------Disabled Example #3: (Config) port security (Netgear Switch) (Config) #port-security ? Press Enter to execute the command. (Netgear Switch) (Config) #port-security Port Security v1.0, Jan 2007 13-3