Netgear GSM7248v1 GSM7224 Administration manual - Page 45
Example 1: Create two LAGS:, show port-channel all
View all Netgear GSM7248v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 Example 1: Create two LAGS: (Netgear Switch) #config (Netgear Switch) (Config)#port-channel lag_10 (Netgear Switch) (Config)#port-channel lag_20 (Netgear Switch) (Config)#exit Use the show port-channel all command to show the logical interface ids you will use to identify the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is assigned id 1/1/2. (Console) #show port-channel all Port- Link Log. Channel Adm. Trap STP Mbr Port Port Intf Name Link Mode Mode Mode Type Ports Speed Active 1/1/1 lag_10 Down En. En. Dis. Dynamic 1/1/2 lag_20 Down En. En. Dis. Dynamic Link Aggregation 6-3 v1.0, Jan 2007
NETGEAR 7000
Series Managed Switch Administration Guide Version 6.0
Link Aggregation
6-3
v1.0, Jan 2007
Example 1: Create two LAGS:
Use the
show port-channel all
command to show the logical interface ids you will use to identify
the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is
assigned id 1/1/2.
(Netgear Switch) #config
(Netgear Switch) (Config)#port-channel lag_10
(Netgear Switch) (Config)#port-channel lag_20
(Netgear Switch) (Config)#exit
(Console) #show port-channel all
Port-
Link
Log.
Channel
Adm. Trap
STP
Mbr
Port
Port
Intf
Name
Link
Mode Mode
Mode
Type
Ports
Speed
Active
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1/1
lag_10
Down
En.
En.
Dis.
Dynamic
1/1/2
lag_20
Down
En.
En.
Dis.
Dynamic