Netgear GSM7248v1 GSM7224 Administration manual - Page 96

The following example con s DiffServ VoIP support

Page 96 highlights

NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 The following example configures DiffServ VoIP support: Enter Global Config mode. Set queue 5 on all ports to use strict priority mode. This queue shall be used for all VoIP packets. Activate DiffServ for the switch. (Netgear Switch) #config (Netgear Switch) (Config)#cos-queue strict 5 (Netgear Switch) (Config)#diffserv Create a DiffServ classifier named 'class_voip' and define a single match criterion to detect UDP packets. The class type "matchall" indicates that all match criteria defined for the class must be satisfied in order for a packet to be considered a match. (Netgear Switch) (Config)#class-map match-all class_voip (Netgear Switch) (Config class-map)#match protocol udp (Netgear Switch) (Config class-map)#exit Create a second DiffServ classifier named 'class_ef' and define a single match criterion to detect a DiffServ code point (DSCP) of 'EF' (expedited forwarding). This handles incoming traffic that was previously marked as expedited somewhere in the network. (Netgear Switch) (Config)#class-map match-all class_ef (Netgear Switch) (Config class-map)#match ip dscp ef (Netgear Switch) (Config class-map)#exit Create a DiffServ policy for inbound traffic named 'pol_voip', then add the previously created classes 'class_ef' and 'class_voip' as instances within this policy. This policy handles incoming packets already marked with a DSCP value of 'EF' (per 'class_ef' definition), or marks UDP packets per the 'class_voip' definition) with a DSCP value of 'EF'. In each case, the matching packets are assigned internally to use queue 5 of the egress port to which they are forwarded. (Netgear Switch) (Config)#policy-map pol_voip in (Netgear Switch) (Config policy-map)#class class_ef (Netgear Switch) (Config policy-class-map)#assign-queue 5 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#class class_voip (Netgear Switch) (Config policy-class-map)#mark ip-dscp ef (Netgear Switch) (Config policy-class-map)#assign-queue 5 (Netgear Switch) (Config policy-class-map)#exit (Netgear Switch) (Config policy-map)#exit Attach the defined policy to an inbound service interface. (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#service-policy in pol_voip (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#exit 11-6 v1.0, Jan 2007 Differentiated Services

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

NETGEAR 7000
Series Managed Switch Administration Guide Version 6.0
11-6
Differentiated Services
v1.0, Jan 2007
The following example configures DiffServ VoIP support:
Enter Global Config mode. Set queue 5 on all ports to use strict
priority mode.
This queue shall be used for all VoIP packets.
Activate DiffServ for the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#cos-queue strict 5
(Netgear Switch) (Config)#diffserv
Create a DiffServ classifier named 'class_voip' and define a sin-
gle match criterion to detect UDP packets. The class type "match-
all" indicates that all match criteria defined for the class must
be satisfied in order for a packet to be considered a match.
(Netgear Switch) (Config)#class-map match-all class_voip
(Netgear Switch) (Config class-map)#match protocol udp
(Netgear Switch) (Config class-map)#exit
Create a second DiffServ classifier named 'class_ef' and define a
single match criterion to detect a DiffServ code point (DSCP) of
'EF' (expedited forwarding). This handles incoming traffic that
was previously marked as expedited somewhere in the network.
(Netgear Switch) (Config)#class-map match-all class_ef
(Netgear Switch) (Config class-map)#match ip dscp ef
(Netgear Switch) (Config class-map)#exit
Create a DiffServ policy for inbound traffic named 'pol_voip',
then add the previously created classes 'class_ef' and
'class_voip' as instances within this policy.
This policy handles incoming packets already marked with a DSCP
value of 'EF' (per 'class_ef' definition), or marks UDP packets
per the 'class_voip' definition) with a DSCP value of 'EF'. In
each case, the matching packets are assigned internally to use
queue 5 of the egress port to which they are forwarded.
(Netgear Switch) (Config)#policy-map pol_voip in
(Netgear Switch) (Config policy-map)#class class_ef
(Netgear Switch) (Config policy-class-map)#assign-queue 5
(Netgear Switch) (Config policy-class-map)#exit
(Netgear Switch) (Config policy-map)#class class_voip
(Netgear Switch) (Config policy-class-map)#mark ip-dscp ef
(Netgear Switch) (Config policy-class-map)#assign-queue 5
(Netgear Switch) (Config policy-class-map)#exit
(Netgear Switch) (Config policy-map)#exit
Attach the defined policy to an inbound service interface.
(Netgear Switch) (Config)#interface 1/0/2
(Netgear Switch) (Interface 1/0/2)#service-policy in pol_voip
(Netgear Switch) (Interface 1/0/2)#exit
(Netgear Switch) (Config)#exit