Netgear GSM7248v1 GSM7224 Administration manual - Page 59
CLI Example, Example #1: Enable Routing for the Switch:
View all Netgear GSM7248v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 • To prevent any RIP packets from being transmitted CLI Example The configuration commands used in the following example enable RIP on ports 1/0/2 and 1/0/3 as shown in the network illustrated in Figure 7-4 Figure 7-4 Example #1: Enable Routing for the Switch: The following sequence enables routing for the switch: (Netgear Switch) #config (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#exit IP Routing Services v1.0, Jan 2007 7-13
NETGEAR 7000
Series Managed Switch Administration Guide Version 6.0
IP Routing Services
7-13
v1.0, Jan 2007
•
To prevent any RIP packets from being transmitted
CLI Example
The configuration commands used in the following example enable RIP on ports 1/0/2 and 1/0/3 as
shown in the network illustrated in
Figure 7-4
Example #1: Enable Routing for the Switch:
The following sequence enables routing for the switch:
Figure 7-4
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit