Netgear GSM7248v1 GSM7224 Administration manual - Page 46
Example 2: Add the ports to the LAGs:, Example 3: Enable both LAGs., By default
View all Netgear GSM7248v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 Example 2: Add the ports to the LAGs: (Netgear Switch) #config (Netgear Switch) (Config)#interface 0/2 (Netgear Switch) (Interface 0/2)#addport 1/1 (Netgear Switch) (Interface 0/2)#exit (Netgear Switch) (Config)#interface 0/3 (Netgear Switch) (Interface 0/3)#addport 1/1 (Netgear Switch) (Interface 0/3)#exit (Netgear Switch) (Config)#interface 0/8 (Netgear Switch) (Interface 0/8)#addport 1/2 (Netgear Switch) (Interface 0/8)#exit (Netgear Switch) (Config)#interface 0/9 (Netgear Switch) (Interface 0/9)#addport 1/2 (Netgear Switch) (Interface 0/9)#exit (Netgear Switch) (Config)#exit Example 3: Enable both LAGs. By default, the system enables link trap notification (Console) #config (Console) (Config)#port-channel adminmode all (Console) (Config)#exit At this point, the LAGs could be added to VLANs. 6-4 Link Aggregation v1.0, Jan 2007