Netgear GSM7248v1 GSM7224 Administration manual - Page 66
The following example con s OSPF on a 7000 Series Managed Switch operating as a border, router
View all Netgear GSM7248v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 6.0 The following example configures OSPF on a 7000 Series Managed Switch operating as a border router: Enable routing for the switch. (Netgear Switch) #config (Netgear Switch) (Config)#ip routing Enable routing & assign IP for ports 1/0/2, 1/0/3 and 1/0/4. (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#routing (Netgear Switch) (Interface 1/0/2)#ip address 192.150.2.2 255.255.255.0 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#routing (Netgear Switch) (Interface 1/0/3)#ip address 192.130.3.1 255.255.255.0 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#interface 1/0/4 (Netgear Switch) (Interface 1/0/4)#routing (Netgear Switch) (Interface 1/0/4)#ip address 192.64.4.1 255.255.255.0 (Netgear Switch) (Interface 1/0/4)#exit Specify the router ID and enable OSPF for the switch. Set disable 1583compatibility to prevent a routing loop. (Netgear Switch) (Config)#router ospf (Netgear Switch) (Config router)#enable (Netgear Switch) (Config router)#router-id 192.130.1.1 (Netgear Switch) (Config router)#no 1583compatibility (Netgear Switch) (Config router)#exit (Netgear Switch) (Config)#exit 7-20 v1.0, Jan 2007 IP Routing Services