Olympus DM-620 DM-620 Detailed Instructions (English) - Page 16
Battery settings - will not turn on
View all Olympus DM-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Power supply Power supply Notes Battery settings • Manganese batteries may not be used in this recorder. Select to match the battery you are using. • When changing batteries, AAA alkaline 1 Replace the batteries and turn on batteries or Olympus Ni-MH rechargeable batteries are recommended. • Be sure to stop the recorder before 1 replacing the batteries. Unloading the batteries while the recorder is in use may cause a malfunction such as corrupting the recorder (☞ P.15). 2 Press the + or − button to change the setting. Battery type the file, etc. If you take out the batteries while recording, you will lose your currently recorded file because the file header will not be able to close. • If it takes longer than 15 minutes to replace the dead batteries or if you take the batteries in and out repeatedly at short intervals, you may have to redo the battery and time settings. In this case, the [Battery] screen will appear. For more details, see "Battery settings". • Remove the batteries if you are not going to use the recorder for an extended period of time. • When replacing rechargeable batteries, [Ni-MH] (õ): Select when using the Olympus NiMH rechargeable batteries (BR404). [Alkaline] (ú): Select when using alkaline batteries. 3 Press the `OK button to complete the setting. be sure to use Ni-MH rechargeable • If the "Hour" indicator flashes in the batteries (optional). The use of other display, see "Setting time and date manufacturers' products can damage the [Time & Date]" (☞ P.22). recorder and should be avoided. Battery indicator The battery indicator on the display changes as the batteries lose power. • When [æ] appears on the display, replace the batteries as soon as possible. When the batteries are too weak, [s] and [Battery Low] will appear on the display and the recorder will shut down. EN 16