Olympus DM-620 DM-620 Detailed Instructions (English) - Page 56
Press the, button to start, recording., button to, adjust the start/stop actuation, level., Select - voice activation
View all Olympus DM-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Menu setting method [Off]: • When using the [VCVA] function, the Disables this function. Will resume following functions are not available. recording in normal mode. • [V-Sync. Rec] When [Standby] is selected: [On]: With this setting, the recording monitor (earphone output) is disabled during VCVA standby (☞ P.34), which allows you to confirm VCVA actuation status by the earphone output. [Off]: The audio signal is always output from the earphone jack. • When [Rec Monitor] is set to [Off], the [Standby] function is disabled (☞ P.59). • If the start/stop actuation level is not adjusted within 2 seconds, the display will return to the previous one. • If the surrounding noise is loud, the start/ stop actuation sensitivity of the VCVA can be adjusted according to the recording situation. Adjust the start/stop actuation level: • To ensure successful recordings, prior 1 Press the REC (s) button to start recording. testing and adjustment of the start/stop actuation level is recommended. 4 • When the sound volume is lower than the preset threshold sound level, V-Sync. Rec recording automatically stops after Voice sync recording starts when a voice 1 sec approximately, and [Standby] louder than the voice sync level (detection flashes on the display. The LED level) is detected. When the voice becomes indicator light glows when recording low, recording will automatically stop. starts and flashes when recording When voice sync recording is on and the pauses. input level falls below the voice sync level 2 Press the 9 or 0 button to (detection level) for a period of at least the specified detection time, the recorder will adjust the start/stop actuation return to the standby mode. level. 1 Select [On] or [Off]. • The VCVA level can be set to any of 23 different values. • The higher the value, the more sensitive the recorder will be to sounds. At the highest value, even the faintest sound will activate recording. [On]: Enables the Voice sync recording function. [Off]: Disables this function. • If you select [On], proceed to the operation of Step 2. Menu setting method a b a Level meter (varies according to the sound volume being recorded) b Start level (moves to the right/left EN according to the set level) 56