Olympus DM-620 DM-620 Detailed Instructions (English) - Page 57
adjust the voice sync level.
View all Olympus DM-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Menu setting method 2 Sets the detection time. 4 Voice sync recording stops [1 second] [2 seconds] [3 seconds] automatically. [4 seconds] [5 seconds] [10 seconds]: • If sound at a volume below the voice If the input (recording level) is equal sync level continues for the specified to or below the specified level for time, voice sync recording will end longer than the specified detection automatically, and the recorder time, the recorder will return to the will return to the standby mode of standby mode. Step 3. Every time the recorder enters Adjust the voice sync level: standby mode, the file will be closed and recording will continue in a 1 Press the REC (s) button to start different file. recording. • To use voice sync recording, set [V-Sync. Rec] to [On] and specify a detection time. 2 Press the 9 or 0 button to adjust the voice sync level. • To stop the recorder during voice sync recording, press the STOP (4) button. • When using the [V-Sync. Rec] function, the following functions are not available. • [VCVA] (☞ P.55) 4 • The voice sync level can be set to any Timer Rec of 23 different values. • The higher the value, the more See "Timer recording [Timer Rec]" (☞ P.70). sensitive the recorder will be to sounds. At the highest value, even the faintest sound will activate recording. Menu setting method a a Voice sync level (moves to the right/left according to the set level) 3 Press the REC (s) button again. • The recorder will go into standby. [Standby] will flash on the display and the LED indicator light will flash. • When the input is at or above the voice sync level, recording will start automatically. EN 57