Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 19
DisplayPort terminal connection
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
● The computer shown in the illustration is for example purposes only. ● Additional equipment and cables shown are not supplied with this set. ● Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range. ● Component Input is possible with the pin 1, 2, 3 of the Mini D-sub 15P Connector. ● Change the [Component/RGB-in select] setting in the [Signal] menu to [Component] (when Component signal connection) or [RGB] (when RGB signal connection). (see page 44) Pin assignments and signal names for PC Input Terminal (Mini D-sub 15P) 54 321 10 9 8 7 6 15 14 13 12 11 Pin No. Signal Name R (PR/CR) G (Y) B (PB/CB) NC (not connected) GND (Ground) GND (Ground) GND (Ground) GND (Ground) +5 V DC GND (Ground) NC (not connected) SDA HD/SYNC VD SCL DisplayPort terminal connection DisplayPort cable (not supplied) PC with DisplayPort output Note ● Please use DisplayPort 1.2 compliant cable. Depending on the types of cable or mini connector adaptor used, 4K picture may not be displayed. ● In connecting with PC which uses early chipsets or graphic cards compatible with DisplayPort, if the DisplayPort output of the PC is connected to this unit, malfunction of this unit or the PC may occur. In that case, turn the power of the unit or the PC off, and then turn it on again. When inputting DisplayPort output to this unit, it is recommended to use the PC which the newest Chipset and Graphics Cards are used. English 19