Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 22

DIGITAL LINK terminal connection

Get Panasonic 98 Large Format 4K Professional Display PDF manuals and user guides View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Note ● If multiple commands are transmitted, be sure to wait for the response for the first command to come from this unit before sending the next command. ● The unit normally responds to the received commands within 200ms. If the response does not come after 1 second, a communication error might have occurred, so send the command again. ● When sending a command which does not require parameter, a colon (:) is not needed. ● If an incorrect command is sent by mistake, this unit will send an "ER401" command back to the computer. ● In Standby condition (power OFF with remote control), the unit responds to PON command only. After sending "PON", send the next command after 15 seconds. ● S1A and S1B of Command IMS are available only when a dual input terminal board is attached. ● Consult your local Panasonic dealer for detail instructions on command usage. DIGITAL LINK terminal connection A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal. Analogue signal is output as Digital signal. 22 English Computer to control the unit When a Panasonic ET-YFB100G is used Computer Video Cassette Recorder DVD Player Note ● When connecting with DIGITAL LINK, be sure to configure each of the [Network settings] settings. For the cautions for DIGITAL LINK setting and connection, see page 65 to 70. ● Corresponding signal for DIGITAL LINK input is the same as that of HDMI input. ● The Panasonic Digital Interface Box (ET-YFB100G) does not correspond to 4K signal.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
English
22
Note
●
If multiple commands are transmitted, be sure to wait
for the response for the first command to come from
this unit before sending the next command.
●
The unit normally responds to the received
commands within 200ms.
If the response does not come after 1 second, a
communication error might have occurred, so send
the command again.
●
When sending a command which does not require
parameter, a colon (:) is not needed.
●
If an incorrect command is sent by mistake, this
unit will send an “ER401” command back to the
computer.
●
In Standby condition (power OFF with remote
control), the unit responds to PON command only.
After sending “PON”, send the next command after
15 seconds.
●
S1A and S1B of Command IMS are available only
when a dual input terminal board is attached.
●
Consult your local Panasonic dealer for detail
instructions on command usage.
DIGITAL LINK terminal connection
A twisted pair cable transmitter such as the Panasonic
Digital Interface Box (ET-YFB100G) uses twisted pair
cables to transmit inputted video and audio signals, and
these digital signals can be input to the Display via the
DIGITAL LINK terminal.
Analogue signal is output
as Digital signal.
Computer to control the unit
When a Panasonic ET-YFB100G is used
Computer
Video Cassette Recorder
DVD Player
Note
●
When connecting with DIGITAL LINK, be sure to
configure each of the [Network settings] settings.
For the cautions for DIGITAL LINK setting and
connection, see page 65 to 70.
●
Corresponding signal for DIGITAL LINK input is the
same as that of HDMI input.
●
The Panasonic Digital Interface Box (ET-YFB100G)
does not correspond to 4K signal.