Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 73
ID Remote Control, Function
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
ID Remote Control Function You can set the remote control ID when you want to use this remote control on one of several different displays. In that case, you need to set the remote control's ID number to match the Display's ID number you have set in [Display ID] following the steps below. Cancelling the setting of remote control's ID number (ID [0]) You can operate even if the ID does not match the ID set in [Display ID]. Press for more then 3 seconds. This has the same effect as pressing . Note ● The ID remote control cannot be used when [Display ID] is set to anything other than "0", and the remote control ID is not the same as the [Display ID] number. (see page 60) Setting the remote control's ID number 1 Set [Controller ID function] to [On]. (see page 60) ● While displaying [Options] menu, you can operate even if the ID does not match. 2 Set the remote control's switch to . 3 Pointing the remote control at the Display you want to control, press . ID Set Display ID 100 Controller ID --- 4 Press one of - . Sets the tens digit. 5 Press one of - . Sets the units digit. ● The steps from 3 to 5 need to be done within 5 seconds. ● Adjustable ID number range is 0 - 100. Example: • To set the ID to "1": After step 3, press and then . • To set the ID to "12": After step 3, press and then . • To set the ID to "100": After step 3, press . English 73