Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 52
HDMI 4K Interface, Display orientation, High altitude mode, No activity power off, Menu display
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
HDMI 4K Interface Sets the combination of input for HDMI 1 to HDMI 2 terminals in 4K resolution images. [Single [HDMI1,HDMI2]]: 4K input with 1 terminal via HDMI 1 or HDMI 2 [Dual [HDMI1&HDMI2]]: 4K input with 2 terminals via HDMI 1 and HDMI 2 Note ● Input combination in 4K resolution images (see page 16) Display orientation Sets the on-screen display orientation in the portrait setting. [Landscape]: Cooling fan control will be set for horizontal installation. [Portrait]: Cooling fan control will be set for vertical installation. The on-screen display rotates anticlockwise by 90 degrees for easy view in the portrait setting. Portrait Landscape Power Indicator Note ● In the portrait setting, the power indicator shall come to the downside. ● Make sure to set to [Landscape] when installing horizontally, and set to [Portrait] when installing vertically. Failure to do so may shorten the life of the internal parts and result in malfunctions. High altitude mode Change settings when using the unit at high altitudes. [Off]: Cooling fan control will be set to use the unit where it is below 1 400 m (4 593 ft) above sea level [On]: Cooling fan control will be set to use the unit at high altitudes (1 400 m (4 593 ft) and higher and below 2 400 m (7 874 ft) above sea level) Note ● When using the unit where it is 1 400 m (4 593 ft) and higher and below 2 400 m (7 874 ft) above sea level, make sure to set to [On]. Failure to do so may shorten the life of the internal parts and result in malfunctions. No activity power off When this function is set to [Enable], the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed. Press any key to abort. No activity power off 3 min When the power is turned off due to this function, a message [Last turn off due to 'No activity power off'.] is displayed next time the power is turned on. Note ● During the screensaver is running, this function is disabled. Menu display duration / OSD brightness / OSD position Set the display time, brightness and the position of the on-screen menu display. [Menu display duration]: [5 sec] - [180 sec] [OSD brightness]: [1] - [5] [OSD position]: [Right], [Left] (Display installation: Horizontal) [Upper], [Lower] (Display installation: Vertical) 52 English