Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 48

[HDMI1 power management] [HDMI4 power management] When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. [Standard mode] When no pictures (sync signal) are detected for 60 or so seconds at HDMI1 - HDMI4 input: Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. [Low power mode] When neither +5V DC nor pictures (sync signal) from HDMI terminals are detected for 60 or so seconds at HDMI1 - HDMI4 input: Power is turned off (standby); the power indicator lights up orange. When +5 V DC and pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. ● In the [Standard mode], power consumption during sleep is higher than that in the [Low power mode]. You can switch the [Standard mode] / [Low power mode] in [HDMI power management mode] of the [Options] menu. (see page 62) [PC power management] (DPMS function) When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. When no pictures (HD/VD sync signals) are detected for 60 or so seconds at PC input: Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected: Power is turned on; the power indicator lights up green. Note ● This function is effective when [Sync] in [Signal] is set to [Auto] and [Component/RGB-in select] is set to [RGB] and during normal viewing. (see page 44) [DVI-D power management] When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. [Standard mode] When no pictures (sync signal) are detected for 60 or so seconds at DVI-D input: Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. [Low power mode] When +5V DC in DVI-D IN terminal or pictures (sync signal) are not detected for about 60 seconds at DVI-D input: Power is turned off (standby); the power indicator lights up orange. When +5V DC or pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. ● In the [Standard mode], power consumption during sleep is higher than that in the [Low power mode]. You can switch the [Standard mode] / [Low power mode] in [DVI-D power management mode] of the [Options] menu. (see page 62) [No signal power off] When this is set to [Enable], the power supply of the unit goes off automatically when there is no operation or sync signal for about 10 minutes. 48 English