Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 80

Symptoms, Check

Get Panasonic 98 Large Format 4K Professional Display PDF manuals and user guides View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Symptoms Power automatically turns off unexpectedly. Check Check the settings of [No signal power off], [PC power management], [DVI-D power management], [HDMI1 power management], [HDMI2 power management], [HDMI3 Power management], [HDMI4 power management] and [No activity power off]. Any of them may be set to [On (Enable)]. (see page 47) There is no picture displayed or sound output sometimes. When HDMI or DVI signals are input to the Display using a selector or distributor, sound or images may not be output in the normal fashion depending on the selector or distributor used. The symptoms may be improved by turning the power off and on again, or by replacing the selector or distributor. Whirring sounds can be heard from the display unit. The display unit is fitted with a cooling fan to dissipate heat generated during normal use. The whirring sound is caused by rotation of the fan and is not a malfunction. The RS-232C is uncontrollable Check whether the connection has been made properly. (see page 20) To control RS-232C command (see page 21) with the Display's SERIAL terminal, when [Network control] in [Network settings] is set to [On], is [DIGITAL LINK mode] set to the item other than [DIGITAL LINK(RS-232C)]? (see page 54) To control RS-232C command (see page 21) with the DIGITAL LINK equipment's SERIAL terminal, is [Network control] in [Network settings] set to [On] and [DIGITAL LINK mode] set to [DIGITAL LINK(RS-232C)]? (see page 54) The LAN is uncontrollable Check whether the connection has been made properly. (see page 64) When controlling with the Web Browser Control or the command control, check whether [Network control] is set to [On] (see page 54), [DIGITAL LINK mode] is set to [LAN], [Auto(LAN)] or [DIGITAL LINK(LAN)]. When connecting to a device of AMX, Extron or Crestron Electronics, Inc., set [AMX D.D.], [Extron XTP] or [Crestron Connected™] according to the device to use. (see page 54, 55) See the [Signal quality] information of [DIGITAL LINK status] to check the LAN cable status such as whether the LAN cable is disconnected or the cable is not shielded. (see page 55) There is no picture displayed or sound output from the [DIGITAL LINK] terminal. Check whether the connection has been made properly between the video (output) equipment and twisted pair cable transmitter and between the twisted pair cable transmitter and this product. (see page 65) Check that [DIGITAL LINK mode] is not set to [LAN]. (see page 55) Power indicator is blinking in red. There is possibility of malfunction. Please contact an Authorized Service Centre. This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction. 80 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
English
80
Symptoms
Check
Power automatically turns off unexpectedly.
Check the settings of [No signal power off], [PC power
management], [DVI-D power management], [HDMI1 power
management], [HDMI2 power management], [HDMI3 Power
management], [HDMI4 power management] and [No activity
power off]. Any of them may be set to [On (Enable)]. (see
page 47)
There is no picture displayed or sound output
sometimes.
When HDMI or DVI signals are input to the Display using a
selector or distributor, sound or images may not be output in
the normal fashion depending on the selector or distributor
used.
The symptoms may be improved by turning the power off
and on again, or by replacing the selector or distributor.
Whirring sounds can be heard from the display unit.
The display unit is fitted with a cooling fan to dissipate heat
generated during normal use. The whirring sound is caused
by rotation of the fan and is not a malfunction.
The RS-232C is uncontrollable
Check whether the connection has been made properly.
(see page 20)
To control RS-232C command (see page 21) with the
Display’s SERIAL terminal, when [Network control] in
[Network settings] is set to [On], is [DIGITAL LINK mode] set
to the item other than [DIGITAL LINK(RS-232C)]?
(see page 54)
To control RS-232C command (see page 21) with the
DIGITAL LINK equipment’s SERIAL terminal, is [Network
control] in [Network settings] set to [On] and [DIGITAL LINK
mode] set to [DIGITAL LINK(RS-232C)]?
(see page 54)
The LAN is uncontrollable
Check whether the connection has been made properly.
(see page 64)
When controlling with the Web Browser Control or the
command control, check whether [Network control] is set to
[On] (see page 54), [DIGITAL LINK mode] is set to [LAN],
[Auto(LAN)] or [DIGITAL LINK(LAN)].
When connecting to a device of AMX, Extron or Crestron
Electronics, Inc., set [AMX D.D.], [Extron XTP] or [Crestron
Connected™] according to the device to use.
(see page 54, 55)
See the [Signal quality] information of [DIGITAL LINK status]
to check the LAN cable status such as whether the LAN
cable is disconnected or the cable is not shielded.
(see page 55)
There is no picture displayed or sound output from
the [DIGITAL LINK] terminal.
Check whether the connection has been made properly
between the video (output) equipment and twisted pair cable
transmitter and between the twisted pair cable transmitter
and this product.
(see page 65)
Check that [DIGITAL LINK mode] is not set to [LAN].
(see page 55)
Power indicator is blinking in red.
There is possibility of malfunction. Please contact an
Authorized Service Centre.
This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio,
depending on the type of input signal. However, this is not a malfunction.