Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 59
Onscreen display, Initial input, Initial VOL level, Maximum VOL level, Input lock
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Onscreen display Set to display / hide the following Onscreen display. ● Power on display ● Input signal switch display ● No signal display ● MUTE display after displaying the menu screen ● MUTE and off timer remaining time display after is pressed ● Off timer remaining time display when 3 minutes remaining [On]: Displays the Onscreen display. [Off]: Hides the Onscreen display. Initial input Adjusts the input signal when the unit is turned on. [Off] / [HDMI1] / [HDMI2] / [HDMI3] / [HDMI4] / [DisplayPort] / [DIGITAL LINK] / [DVI-D] / [PC] / [SDI1]* *: When a Terminal Board is installed to the SLOT, its Terminal name will be displayed. Note ● This menu is available only when [Input lock] is [Off]. (see page 59) Initial VOL level Adjusts the sound volume level when the unit is turned on. [Off]: It will be the sound volume level which had been set before the power of the unit was turned off. [On]: Sets your preferred volume. ● You can hear the changed volume regardless of your volume setting before opening the [Options] menu if you adjust the volume when [Initial VOL level] is [On] and cursor is on the menu. ■ To adjust sound volume level Press . Note ● When [Maximum VOL level] is [On], the volume can only be adjusted between 0 and your maximum range. (see page 59) Maximum VOL level Adjusts the maximum volume. [Off]: The sound volume level can be set up to 63 (maximum). [On]: The sound volume level will not exceed the set point. ■ To adjust sound volume level Press . Note ● When the [Maximum VOL level] is set lower than the [Initial VOL level], the [Initial VOL level] automatically becomes the same as the [Maximum VOL level]. The volume display can go up to 63 regardless of the settings. ● You can hear the changed volume regardless of your volume setting before opening the [Options] menu if you adjust the volume when [Maximum VOL level] is [On] and cursor is on the menu. Input lock Locks the input switch operation. [Off] / [HDMI1] / [HDMI2] / [HDMI3] / [HDMI4] / [DisplayPort] / [DIGITAL LINK] / [DVI-D] / [PC] / [SDI1]* *: When a Terminal Board is installed to the SLOT, its Terminal name will be displayed. Note ● Input switch can be used when this is set to [Off]. English 59