Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 7

Safety Precautions WARNING ■ Setup This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Pedestal* TY-ST85P12 84-inch model TY-ST103PF9 98-inch model • Mobile stand for Display TY-ST85PB1 84-inch model • Wall-hanging bracket (vertical)* TY-WK85PV12 84-inch model TY-WK103PV9 98-inch model • Ceiling-hanging bracket* TY-CE85PS12 84-inch model TY-CE103PS10 98-inch model • 3G-SDI Terminal Board with Audio TY-TBN03G • Digital Interface Box ET-YFB100G *: The diameter of the screws for attaching these fixing brackets is M16. When using 3G-SDI Terminal Board with Audio (TYTBN03G), please read the manual included with it and follow the instruction. We are not responsible for any product damage, etc. caused by use of the pedestal, wall-hanging bracket or ceiling-hanging bracket made by other companies, or by failures in the installation environment for the pedestal, wall-hanging bracket or ceiling-hanging bracket even during the warranty period. Always be sure to ask a qualified technician to carry out set-up. The optional fixing brackets and pedestals are made to be used for both LCD and Plasma displays. When using with this unit, visit the web site below, check the instructions on your fixing brackets and pedestals to be used with LCD Displays, and then install. http://panasonic.net/prodisplays/download/options02.html Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation. Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base. • The Display may fall off or tip over. Install this unit at a location with minimal vibration and which can support the weight of the unit. • Dropping or falling of the unit may cause injury or malfunction. Do not place any objects on top of the Display. • If foreign objects or water get inside the Display, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer. Transport only in upright position! • Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains. For sufficient ventilation, see page 9. When installing the Display vertically; When installing the Display vertically, be sure that the Power Indicator comes to the downside. Heat is generated and it may cause fire or damage to the Display. • Set [Display orientation] in the [Setup] menu to [Portrait]. (see page 52) Cautions for Wall, Ceiling or Pedestal Installation • Wall, Ceiling or Pedestal installation should be performed by an installation professional. Installing the Display incorrectly may lead to an accident that results in death or serious injury. Use the optional Pedestal or Wall-hanging bracket. • If you terminate the use of the Display on the Wall, Ceiling or Pedestal, ask a professional to remove the Display as soon as possible. • When mounting the Display on the wall, prevent the mounting screws and power cable from contacting metal objects inside the wall. An electric shock may occur if they contact metal objects inside the wall. Do not install the product to a place where the product is exposed to direct sunlight. • If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect. ■ When using the LCD Display The Display is designed to operate on 110 - 127 or 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Display to overheat, which can cause fire or damage to the Display. Do not stick any foreign objects into the Display. • Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Display, as doing so can cause fire or electric shock. English 7