Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 26
Basic Controls
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic Controls AC socket outlet Power supply cord (supplied) Remote Control Sensor Power Indicator Main Power On / Off switch Operate pointing the remote control directly at the unit's Remote Control Sensor. 1 Connect the AC cord plug to the Display. (see page 14) 2 Connect the plug to the socket outlet. Note ● Main plug types vary between countries. The power plug shown at left may, therefore, not be the type fitted to your set. ● When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first. 3 Press the on the unit to turn the set on: Power-On. ● Power Indicator: Green (Picture is displayed.) ● When the power of the unit is ON, remote control operation is possible. ■ To turn the power ON/OFF with the remote control Press the button to turn the Display on. ● Power Indicator: Green (Picture is displayed.) Press the button to turn the Display off. ● Power Indicator: Red (standby) Press the on the unit to turn the unit off, when the power of the unit is turned on or in standby mode. Note ● During operation of the "Power management" function, the power indicator turns orange in the power off state. "Power management" function (see page 47) 26 English