Panasonic 98 Large Format 4K Professional Display Operating Instructions - Page 77
Preset Signals
View all Panasonic 98 Large Format 4K Professional Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Preset Signals Following signal timing is preset to this unit. These preset signals are written on EDID of the each input terminal. (Except for *6) In many cases, it is possible to receive the signals other than below with this unit's multi scan function. (Except for 4K signal) Signal name 525 (480) / 60i 625 (576) / 50i 525 (480) / 60i*2 625 (576) / 50i 525 (480) / 60p*2 625 (576) / 50p 750 (720) / 60p*2 750 (720) / 50p 1 125 (1080) / 60i*1 *2 1 125 (1080) / 50i*1 1 125 (1080) / 24p*1 *2 1 125 (1080) / 25p*1 1 125 (1080) / 30p*1 *2 1 125 (1080) / 60p*1 *2 1 125 (1080) / 50p*1 640 × 480 (VGA) 800 × 600 (SVGA) 1 024 × 768 (XGA) 1 280 × 768 1 366 × 768 1 280 × 1 024 (SXGA) 1 600 × 900 1 920 × 1 080 1 920 × 1 200 (UXGA) 4K signal 3 840 / 24p*2 3 840 / 25p 3 840 / 30p*2 4 096 / 24p*2 3 840 / 50p 3 840 / 60p*2 4 096 / 50p 4 096 / 60p*2 4K (Dual Link) signal 3 840 / 50p 3 840 / 60p*2 4 096 / 50p 4 096 / 60p*2 H-Freq. (kHz) 15.73 15.63 15.75 15.63 31.50 31.25 45.00 37.50 33.75 28.13 27.00 28.13 33.75 67.50 56.25 31.47 37.88 48.36 47.70 48.39 63.98 60.00 67.50 74.04 V-Freq. (Hz) 59.94 50.00 60.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 24.00 25.00 30.00 60.00 50.00 59.94 60.32 60.00 60.00 60.04 60.02 60.00 60.00 59.95 Dot clock frequency (Hz) 13.5 13.5 27.0 27.0 27.0 27.0 74.25 74.25 74.25 74.25 74.25 74.25 74.25 148.5 148.5 25.18 40.00 65.00 80.14 86.71 108.0 108.0 148.5 154.0 PC IN HDMI 1 HDMI 2 HDMI 3 HDMI 4 DVI-D IN Mark: Preset signal DIGITAL LINK DisplayPort *6 *6 54.00 56.25 67.50 54.00 112.5 135.0 112.5 135.0 24.00 25.00 30.00 24.00 50.00 60.00 50.00 60.00 297.0 297.0 297.0 297.0 594.0 594.0 594.0 594.0 *4 *5 *4 *5 *4 *4 112.5 50.00 297.0 *3 135.0 60.00 297.0 *3 112.5 50.00 297.0 *3 *6 135.0 60.00 297.0 *3 *6 *1: Based on SMPTE 274M standard. *4: Supported in YCBCR 4:2:0 format *2: Compatible with frame frequency 1/1.001 *5: Supported with MST(Multi Stream Transport) only *3: The format supports Dual Link. (see page 16) *6: Not written on EDID In some cases, these signals may not be displayed when setting Resolution on your PC. Note ● Signals without above specification may not be displayed properly. ● For the signals when 3G-SDI Terminal Board with Audio is installed, refer to the manual included with it. English 77